|
Home
SAR
| |
Golf Clubs, Marinas, Resorts, Parks, Trails, Country Clubs, Theme Parks,
Zoos.
Almost any large managed facility needs not just signage; but more importantly attractive
maintenance free signage. This is where we can help.
 |
A simple cast used here as
a trail marker.It has a sandblasted redwood grain with a flat panel for
directional arrows. |
Visual corporate recognition is a major
factor in any development, although it appears that many architects and designers either
forget about the secondary and tertiary signage altogether; or they put them on such a low
priority, both in time allowed and financially, that the commonality is everything but the
primary identification sign must be done on a shoestring and tomorrow.
We can make a real difference here. It is
possible to produce a master generic blank specifically for one client with their logo
already in it. This means that every sign has that visual continuity which is so important
for the image of our clients. Plus for their guests and customers every time that same
shape, color and emblem is seen, people subconsciously realize that it is an official sign
giving them information to help direct or inform them. This benefits everyone.
- Once a master is made signs can be manufactured in either urethane or polyester at our
Pinehurst facility quickly, and sent out to a sign or finishing shop to be painted and
lettered or we can do the whole thing in house.
- The signs are very cost effective especially as quite complex logos can be molded into
each and every sign.
- These signs will never crack, split, rot or do any of
 |
 |
| These two versions of the same cast show how one
has been turned into a stop sign using vinyl and latex paint, and the other was masked
everywhere except the center panel which was then sandblasted which gives the effect of a
stone panel set into a redwood surround. |
the other things that most wooden signs are apt to do, yet they look exactly like
the master they were created from down to a microscopic level (it is almost
impossible to tell the urethane from the original without picking it up.)
- The raised panel for the hand or vinyl lettered copy makes the sign reusable should it
no longer be needed. Therefore, instead of throwing away a perfectly good sign and
going to the expense of buying a new one, all that has to be done now is to re-letter the
center panel.
| Below right 350
lbs. swinging from one of our double sided street blades: Two
36" threaded steel rods are cast into each sign leaving 6"
protruding to bolt them onto a post. (Okay, so it's started to bend - so would you with
350 lbs hanging off you!!! We suspended two 100lb bags of sandblasting sand from one of
these signs for one hour - it did not bend). |
Information Request Form
Select the items that apply, and then let us know how to contact you.
|
Thank you for
taking a few minutes to visit our site.
