signs used for :: Community signs :: Community Traffic and information signs

Street and Traffic Signs for Communities

 

We have a range of generic molded street signs and traffic control signs made especially for private subdivisions, communities, resorts and shopping areas. These signs can be customized with logos to give a consistency to your traffic signage that is unique to you.  There are also backing boards available to make your signage just that little bit different from the normal signs, so that they have an attractive "finishing touch". The same can be said for directional signs and informational signs.

Classic signs has been making signs for communities for many years and our experienced designers will be happy to help you with any traffic solutions you may need.

Other places to find traffic and informational signs:
 
Talk to a Designer Now
1800 948 4307
8:30 - 5:30 pm EST.
How many eyes has a typical person?
Every custom sandblasted sign, carved sign & routed sign we create is individually designed and made for you. You can request more information for your project using the form above. Or for fast personal service, call one of our designers.
1800 948 4307
 

Featured Sign of the Month

Uwharrie Point Country Club Main Entrance

This PVC Monument Sign is approx 8ft high by 14ft. wide and was originally made from Redwood. After approx 25 years it had rotted. The board of the residents association were very keen to keep the original appearance exactly the same as the original but they wanted it to be from a material that wouldn't rot.  We had access to  the original architects drawings, so we set about converting the plans into a computer file engineered to be made from PVC and aluminum but to look exactly like the original. Every piece of coving and molding was made in house, and then assembled into three pieces which were transported to the site where it was assembled. The whole monument sign was painted with six coats of a high quality Benjamin Moore latex paint ( it lasts longer on PVC than paints costing over $100 .00/gall more. Then apart from the center panel all of the monument was painted once more by brush and as it was drying the brushes were dragged carefully along the length of each section creating a wood grain effect; thus removing any appearance of the sign looking plastic.

 uwharrie point entrance sign pvc monument classic signs nc 900x536