Architectural Post and Panel Signs

 

Apost and panel aluminum architectural sign classic signs nc 220x165rchitectural Signage often refers to the very utilitarian style of signs that are traditionally used around modern business parks, colleges and hospitals etc. Very low maintainance, functional, easy to change the copy etc.

Post and panel signs are very functional and used not to be very attractive, but recent design and manufacture changes have given rise to very noticeable and eyecatching sign systems.

Pinehurst Surgical small architectural directional sign from Classic signs NC 220x165

 

Sometimes simplicity is best to help accentuate other things. Or perhaps when function is more important than form, then post and panel signs are perfect.

They don't have to be made out of aluminum either If your budget doesn't stretch to aluminum post and panel signs then PVC can work very well and be less of an investment.

magnolia place 1 pvc sign with acrylic letters classic signs nc 220x165The Magnolia post and panel sign shown here is manufactured from PVC posts and panel but instead of vinyl letters we used routed custom cut acrylic letters so that it ties in with the rest of the renovated building which is quite old.

magnolia place 2 pvc sign with acrylic letters classic signs nc 220x136

 

Some of the signage had to be made to replace existing grandfathered signs. so we used this method to transcend between old hand made and functional, directional & informational post and panel signs.

 

Razooks replace wooden sign with pvc classic signs nc 220x165

The top two signs are both aluminum post and panel with vinyl graphics.

The next two are PVC post and panel both with appliqued acrylic letters, one has easily removable tenant panels.

The final sign is also PVC, it was the grandfathered sign we needed to duplicate from when this building was the Razooks store in Pinehurst.

Talk to a Designer Now
1800 948 4307
8:30 - 5:30 pm EST.
Name
Enter your email
Telephone
Tell us about your project

 Help us prevent SPAM!
  
Every custom sandblasted sign, carved sign & routed sign we create is individually designed and made for you. You can request more information for your project using the form above. Or for fast personal service, call one of our designers.
1800 948 4307
 

Featured Sign of the Month

Uwharrie Point Country Club Main Entrance

This PVC Monument Sign is approx 8ft high by 14ft. wide and was originally made from Redwood. After approx 25 years it had rotted. The board of the residents association were very keen to keep the original appearance exactly the same as the original but they wanted it to be from a material that wouldn't rot.  We had access to  the original architects drawings, so we set about converting the plans into a computer file engineered to be made from PVC and aluminum but to look exactly like the original. Every piece of coving and molding was made in house, and then assembled into three pieces which were transported to the site where it was assembled. The whole monument sign was painted with six coats of a high quality Benjamin Moore latex paint ( it lasts longer on PVC than paints costing over $100 .00/gall more. Then apart from the center panel all of the monument was painted once more by brush and as it was drying the brushes were dragged carefully along the length of each section creating a wood grain effect; thus removing any appearance of the sign looking plastic.

uwharrie point entrance sign pvc monument classic signs nc 900x536