Uwharrie Point Country Club Main Entrance

This PVC Monument Sign is approx 8ft high by 14ft. wide and was originally made from Redwood. After approx 25 years it had rotted. The board of the residents association were very keen to keep the original appearance exactly the same as the original but they wanted it to be from a material that wouldn't rot.  We had access to  the original architects drawings, so we set about converting the plans into a computer file engineered to be made from PVC and aluminum but to look exactly like the original. Every piece of coving and molding was made in house, and then assembled into three pieces which were transported to the site where it was assembled. The whole monument sign was painted with six coats of a high quality Benjamin Moore latex paint ( it lasts longer on PVC than paints costing over $100 .00/gall more. Then apart from the center panel all of the monument was painted once more by brush and as it was drying the brushes were dragged carefully along the length of each section creating a wood grain effect; thus removing any appearance of the sign looking plastic.